China Makina PDF Katalog

 Makine Resimleri;

HBL-DC ekstra makineye ihtiyaç duymadan aşağıdaki poşetleri üretebilir:

The machine consists of unwinding and rewinding with pneumatic shaft, printing units, CCD camera, touch screen, second pass, web-guide, manual ink adjustment, Yaskawa or Panasonic servo motor, automatic oil supply, automatic plate mounting and adjustment- using 0.15 mm plate.

The big advantages of the machine are that: 1) it can cater to a wide range of material, film- 0.05 mm and above, paper 60-350 gsm. 2) It can save paper at start stage, plate change –paper waste within 50 meters, at interval stop-almost no loss of color. Our report from the client showed that to save 50 USD a shift is a small case compared with the other’s Chinese machine of same type. 3) The dampening system only uses 3-5% alcohol which has less smell and also cost saving.

Note: The specification listed is only for a reference as the specification is different according to different requirement of the customer.

Main Features of the Machine

  WJPS350 Shaftless Offset (Alcohol Dampening) Intermittent Rotary Label Printing Machine is a perfect combination of Japanese Hamada technology and intermittent rotary, vacuum conveying system of our company. Through close cooperation with Japanese engineer, our machine has been able to be the leading level, in domestic or even in the world, on water, ink pressure balancing so that to make the machine stable in color printing as well as endurance. Compared with other producer in China our machine are more stable in paper conveying due to special designed unwinding and rewinding system; less wastage for first start-generally 20-30 meters depends on the skill of the operator but no longer than 40 meters, easy for operation- training time generally 5 working days; and with wider range for material production-0.05 to 0.55mm in thickness..

a) The shaftless control system precisely controls the servo motors to make the machine work under its best status.

b) The machine adopts auto speed tracing system for ink volume supply. This makes the operator run the machine without attention for the ink volume adjustment and ensures uniformed ink supply.

c) Unique inking design system – high –speed ink stringing and low-speed ink evening reaches a super printing effect in which the ink bar trouble and ghost images are efficiently avoided

d) Unique pressure regulating design enables no pressure re-regulation while doing plate cleaning or changing which solves the problem of color differences due to uneven pressure.

e) Patented Fast Loading design makes the loading and unloading of the plate roller easy and fast.

f) Unique vacuum paper unwinding system (optional, patent) ensures the tension stability and protects the paper from being damaged by friction. This system also enlarges the material range to be used in this machine.

g) The unique vacuum material conveying system(optional) ensures no edge printing which saves material cost.

h) The above machine design makes it cater a wider range of the paper such as compound, thermal sensitive and corona paper.

i) The machine can also be equipped with flexo, UV varnishing, back printing and roll to roll die-cutting stations which makes the machine cater a wider range of customer demands and enhance the competitiveness of the printer.

Note: If you choose the vacuum system, the minimum width of the material is 120mm.

a) The main motor adopts imported converter to adjust the speed in a stepless way.

b) Unwinding and rewinding are controlled through magnetic powder brake and clutch. It uses Japanese Mitsubishi tension controller to control the tension of the machine to ensure stable tension and precise overlapping.

c) The machine is equipped with ceramic rollers for inking with the features of stable inking, no color difference, long life span, wear and tear endurance, anti corrosion which will also increase the print quality and efficiency.

d) The printing unit can register in 360 degrees at longitudinal direction and do lateral adjustment as well which greatly shorten the pre-print time and reduces the material waste.

e) . Each printing unit is equipped with one infrared drier to dry the print right after it is printed.

f) The inking roller can automatically fall off at stoppage and run at low speed in order to keep the ink from being dry and solid.

g) Unwinding, printing, vanishing, drying, laminating and rewinding of roll material can be done in one process. It is characterized by wide application, no ink population, fast dry and quick print. It is an ideal printing machine for the commercial bill, board and high-grade adhesive label.

h) It is also optional for the machine to be equipped with UV unit, web-guide and corona Unit.

Main Specification

a) It adopts inclined back design. When doing printing (or die-cutting), the machine will get in touch with the bed in a progressive mode which makes the pressure keep in balance, no matter what it is printed –either background color or fine letters , the machine can print very clearly.

b) It is easy to change plate, reducing the loss of test-run material consumption as well as production cost.

c) Easy operation which solves the shortage of skilled workers.

d) It adopts Taiwan convertor, convenient to adjust the printing speed

e) It can finish the printing, laminating, die-cutting ,waste discharging and sheeting at one process

f) One cast iron structure, stable and durable.

g) The machine is computerized, second print can be achieved.

h) All steel rollers are chromed and grinded which makes it more anti-rust and high precision in ink transfer.

i) The main axle uses alloy copper bush with auto lubrication system. This greatly enhances the precision and durability of the machine.

j) The option items for this machine are: side punching, cross punching, stamping or UV ink printing.

Note: The printing speed will be decided by the quality of printing material, printing length and printing requirement.

Characteristics

This machine is generally used for one color roll paper flexo printing (70-250 gsm) and self-adhesive paper coating (solid printing) or one color flexo printing. It has functions of IR drying and re-winding.

The main motor is driven by converter with auto tension control for unwinding and auto tension control for rewinding. It has a compact structure with easy operation, no-air pollution. If UV unit and film lamination device are equipped with the machine it can do UV glue film lamination and UV vanishing.

Optional functions: UV lamination device and UV vanishing

WJTJ-350 Rotary Hot Stamping machine adopts rotary hot-stamping mode which is mainly used for solid foil hot-stamping and hot transfer of foil stamping.

The machine uses Hohe IR with the feature of high heat efficiency, high strength, high penetration and lower energy consumption. It overcomes the defaults of no vacuuming, big thermal inertia, low precision on temperature control, low heat transfer efficiency and low life span for ordinary heating tube and milky quartz heating tube. Equipped with thyristor smart power regulator and heat-conducting oil as transfer medium, it has the feature of fast heat transfer, even and consistent temperature on the surface of the roller. It has the function of auto web-guide at rewinder, auto meter counting and auto-stop at the end of counting.

a) The machine adopts flat-bed mode and the material runs stably.

b) Servo motor controls the driving to ensure precise material transportation.

c) The machine has auto edge correction and electric eye tracer which ensure high precise die-cutting.

d) It can do die-cutting, waste discharging, sheeting and rewinding in one process.

e) It is optional for the machine to add separate unwinding unit, lamination, stamping and punching.

f) Multi-function design makes the machine fit for adhesive, Nylon, laser anti-counterfeit and blank label die-cut. It is a complementary equipment for rotary label printing machine, flexo printer, screen printer etc.

Note: The die-cut speed will be decided by material quality, material length and print requirement.

a) The machine adopts flat-bed mode and the material runs stably.

b) Servo motor controls the driving to ensure precise material transportation.

c) The machine has auto edge correction and electric eye tracer which ensure precise die-cutting

d) It can do die-cutting, waste discharging, sheeting and rewinding in one process.

e) It is optional for the machine to add separate unwinding unit, lamination, stamping and punching.

f) Multi-function design makes the machine fit for adhesive, Nylon, laser anti-counterfeit and blank label die-cut. It is a complementary equipment for rotary label printing machine, flexo printer, screen printes etc.

WJMF-350 die-cutting machine is a new model with rotary die-cutting and slitting function. It’s suitable for the blank adhesive labels. Die-cutting, slitting can be finished in one process.It has the function of automatic meter counting, automatic stopping , web-guide and waste-off.

The machine has the characteristics of compact structure, fast speed, high efficiency, easy operation ,accurate slitting ,steady running etc.

Optional Function: Glue Tape Lamination.

Main Specification

a) Electric Control System: The main control unit adopts imported electric components, together with CPU via DOS system to control the servo motors, which ensures the machine, high responding, accurate towing, easy operating and safe running.

b) Shaftless Driving: The machine uses servo motor to drive the rollers directly, providing a guarantee for precise high-speed running.

c) Overprinting System: Once printing length is input at the main control unit, every unit will move automatically to the preset position. Each unit is controlled individually by a motor .With the help of CCD image, lateral, longitudinal and bevel direction registration can be achieved without stopping the machine production. This greatly increases the print quality and reduced the production wastage.

d) Printing Unit: Each unit can work independently, which enhance the production efficiency greatly. There is a touch screen on each unit, you can work easily.

e) Water And Ink Control: The machine adopts advanced American water and ink supplying system which ensures the water and ink balance, stability at low and high speed and bright print result. The classic structure, which makes the water and ink perfect mixture and balance on the first printing roller through one bridge roller, greatly reduced the waste of the material. The floating print roller, which is firstly used in China, effectively prevent the ink bar and ghost from the print. Film and paper can be printed on this machine easily.

f) Lubricating System: the machine uses automatically cycling oil-supply system to ensure the accuracy and service life of the machine.

g) The computer controlled automatic and manual plate mounting and dismounting system shortened the plate changing time and increases the safety level of the machine. ( Plate changing for 6 color only needs 6 minutes)

h) The Japanese origin SMC Pneumatic clutch pressure control system ensures smooth and accurate running of the machine; Twice clutching done by Japanese Fujikoshi three –point suspension bearing , makes the PS plate and the water blanket fully pre-inked and then be pressed which greatly reduces the pre-print paper wastage.

i) 7 o'clock arrangement of the rollers, high precision servo drive, twice clutching control and color lose prevention system make high quality prints and competitiveness of the machine.

j) The new ink fountain partition structure, easier to adjust the ink, reducing printing time and paper waste. 

k) This machine can also be equipped with automatic ink volume control system, flexo vanishing, cold stamping unit and rotary die-cutter unit, to enable multifunction of the machine and to improve marketing competitiveness.

Note:

a) The printing speed is subject to the length and quality of the printing material.

b) If you choose the vacuum sucking device, the minimum width of the material is 160mm.

Full automatic multi-color printing sensor positioning, color registration repeatedly, computer controlled, simple in operation, accurate in coloring, so is's able to improve the printing quality.

Flexible setup of printing speed, counting printing number, and automatic shutdown as per set number.

Standart functions, automatic paper feeding, printing, CNC extension, drying and rewinding.

Basic configuration: paper feeding machine, hot ait drier machine, and a standard toolkit.

Optional configurations: UV Drying system, paper slitting machine, and rewinder.